PPG Steelguard FM2570

PPG Steelguard FM2570

SKU id3992 UN1263 (Class: 3, Pk Grp: III)
A one component, thin-film, solvent borne, intumescent coating designed for providing fire protection to structural steelwork in an industrial environment.
Available in 20 Litres
£327.45 (£392.94 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£327.45 (£392.94 Inc VAT)

Product Description

PPG Steelguard FM2570 is a one component, thin-film, solvent borne, intumescent coating designed for providing fire protection to structural steelwork in an industrial environment.

Best Uses

PPG Steelguard FM2570 has been tested to national and international standards and can be used in dry, internal environments without the use of a protective topcoat. Steelguard FM2570 is an excellent fire resistant product that provides up to 120 minutes of protection from cellulosic fires and provides surface with 12 months of weather resistance, when no topcoat is used, providing the structure is not immersed in water or exposed to high humidity.

Application

PPG Steelguard FM2570 intumescent coating can be applied using airless spray for optimum performance and a brush should only be used for touch ups and small tricky areas. Steelguard FM2570 should not be applied below 5 degrees or above 50 degrees celsius, otherwise it may not adhere to the surface properly. With quick drying time FM2570 is dry in just 50 minutes and can be recoated after 4 hours in conditions of around 20 degrees celsius.

Surface and Environment

PPG Steelguard FM2570 can be used of on-site or off-site application and when dry produces a high quality, white matt protective coating that can be used internally or externally to ensure that structural steel has the utmost protection from the risk of fire.