PPG SigmaGlide 890 is a non-toxic, two component silicone based finish for fouling release systems that can be used on any new build or maintenance project.
Sigmaglide 890 is part of a system that works to protect the surface from fouling caused in a marine environment.
Sigmaglide 890 is best used for providing adhesion to SigmaGlide finishes that can be applied over a number of specific systems including ships and appliances that intake sea water.
Sigmaglide 890 can be applied using airless spray to achieve a finish with a theoretical coverage rate of 5-6m2 per litre and produces a glossy, red-brown finish.
Surface and Environment
Sigmaglide 890 can be used in coastal and marine environments, and serves the purpose of protecting vessels and other marine based appliances against fouling. Please feel free to give us a call and find out more information on how this product can be used to best effect.
- Non-toxic, fouling release coating for ships, installations and sea water intakes under all fouling conditions
- For use at newbuilding or maintenance
|Type:||Fouling releasing paint|
|Stock Colours:||Red Brown|
|Tintable:||Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||215.0g per Litre|
|Suitable Substrates:||For ship antifouling in seawater situations|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||5.1m2 per litre at 150 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||150 microns|
|Pot Life:||4 hours at 20°C|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||Minimum 2 hours at 20°C|
|Cleaner / Thinner:|
|Shelf Life:||At least 36 months when stored cool and dry|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.