PPG are one of the leading suppliers of temperature indicator paint, Sigmarite 37-B-1 Temperature Indicator Paint has been formulated to change colour from blue to white when the surface reaches 200°C.
PPG are one of the leading suppliers of temperature indicator paint, Sigmarite 37-B-1 Temperature Indicator Paint has been formulated to change colour at varying temperatures indicating if your surface is hot. This highly sought after temperature indicator paint has a trigger and changes colour from blue to white when temperatures of the surface the paint has been applied to reaches over 200 degrees C.
PPG Sigmarite 37-B-1 Temperature Indicator Paint should be applied over Sigmazinc 11 on a variety of surfaces where temperature needs to be monitored.
Due to the expansive properties of this temperature indication paint you can use a variety of methods to apply Sigmarite 37-B-1. Apply using a paint brush, roller or airless spray, see data sheet.
Surface and Environment
PPG Sigmarite 37-B-1 is generally used on steel surfaces. Once primed with PPG SigmaZinc 11, Sigmarite 37-B-1 temperature indication paint is designed to withstand temperatures of over 200 degrees centigrate indicated by a colour change from blue to white. For this reason Sigmarite 37-B-1 is suitable for use in multiple environments.
- PPG Sigmarite 37-B-1 (Amercoat 37-B-1).
- Temperature indication paint blue
- Indicates potentential dangerous hot spots
- Colour changes above 200° C from blue to white
|Type:||Temperature Indication Paint|
|VOC Content:||449.0 g/l|
|Volume Solids:||44 +/- 2%|
|Application Method:||Brush, Roller, Airless Spray or Air Spray|
|Theoretical Coverage:||17.6 m2/l at 25 microns|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||25-40 microns (1.0 - 1.6 mils)|
|Overcoatable:||Minimum 16 hours at 20°C|
|Cleaner / Thinner:||Thinner 21-06|
|Shelf Life:||At least 12 months when stored cool and dry|
|Packaging:||Available in 4 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.