PPG Sigmarite 37 G1 Temperature Indicator Paint triggers and changes colour from green to white when temperatures of the surface it is applied to reach over 260° C.
PPG Sigma are the leading suppliers of temperature indicator paint which is designed to change colour at varying temperatures indicating if your surface is too hot. This high performance temperature indicator paint triggers and changes colour from green to white when temperatures of the surface it is applied to reach over 260°C
PPG Sigmarite 37 G1 Temperature Indicator Paint can be used on a variety of surfaces as it has key properties designed to be applied to almost any surface where you need to monitor heat.
Due to the expansive properties of this temperature indication paint PPG Sigmarite 37 G1 can be applied by a variety of methods. Apply by paint brush, roller or even airless spray (using thinners). All application methods deliver the same results
Surface and Environment
PPG Sigmarite 37 G1 is generally used on steel surfaces. Once primed this premium grade temperature indication paint is designed to withstand temperatures of over 260°C indicated through a colour change from green to white.
- Temperature indication paint green
- Indicates potentential dangerous hot spots
- Colour changes above 260°C. from green to white
|Type:||Temperature indication paint|
|VOC Content:||487.0 g/l|
|Volume Solids:||44 +/- 2%|
|Application Method:||Brush, Roller, Airless Spray or Air Spray|
|Theoretical Coverage:||17.6 m2 per litre at 25 microns|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||25-40 microns (1.0 - 1.6 mils) depending on system|
|Overcoatable:||After minimum 24 hours at 20°C|
|Cleaner / Thinner:||PPG Thinner 21-06|
|Shelf Life:||At least 12 months when stored cool and dry|
|Packaging:||Available in 4 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.