This product is unavailable to UK markets. Contact our technical team for a suitable alternative.
PPG SigmaShield 610 is a two component, amide cured epoxy coating for use under PPG SigmaGlide fouling release systems.
Due to PPG SigmaShield 610's good impact and water resistance, this paint is an ideal intermediate midcoat for PPG SigmaGlude fouling release systems.
- Specialized coating for use under SIGMAGLIDE fouling release system
- Excellent water resistance
- Good impact resistance
Substrate temperature during application and curing should be between 10°C and 20°C and at least 3°C above dew point. Overcoatable with PPG SigmaGlide 790 after 6 hours to 5 days at 20°C.
PPG SigmaShield 610 is used within the following Sika systems:
- PPG 3127 System - SigmaGlide Fouling Release Coating System
See Data Sheets tab for System sheet downloadable PDF.
|Stock Colours:||Red Brown, Blue|
|VOC Content:||331.0 g/kg|
|Suitable Substrates:||Boat Fouling|
|Application Method:||Air Spray, Airless Spray, Brush or Roller|
3.8m2 per litre for 150 microns
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||150μm|
|Pot Life:||4 hours at 20°C|
|Touch Dry:||2 hours at 150 microns at 20°C|
|Recoatable:||With PPG SigmaGlide 790|
|Full Cure||4 days at 20°C|
|Cleaner / Thinner:||Clean with PPG Thinner 90-53|
|Shelf Life:||At least 24 months when stored cool and dry|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.