PPG Steelguard 651

SKU
id25455
Non Hazardous
Waterborne intumescent coating for fire protection of structural steelwork.
Available in 20 Litres
£386.27 £321.89
In stock
Product Description

PPG Steelguard 651 is a one-component, thin-film, waterborne intumescent coating for fire protection of structural steelwork. It provides up to 120 minutes protection from cellulosic fires.

Best Uses

PPG Steelguard 651 can be used in the following segments:

  • Fire Protection
  • Infrastructure & Rail
  • Airports
  • Cellulosic Fire Protection 
  • Commercial Buildings
  • Stadiums & Venues

Steelguard 651 is suitable for C1, C2 and C3 internal environments (ISO 12944); for dry internal (C1) environments no topcoat is required.

Application

Approved primer must be sound, dry and free from any contamination.

The recommended application method is with an airless spray. Stir thoroughly until homogenous and free of lumps. Note that adding too much water will result in reduced sag resistance and slower cure.

Technical Details

Notes

  • Provides up to 120 minutes protection from cellulosic fires
  • On-Site application
  • Up to 700 microns (28.0 mils) DFT in a single coat
  • Suitable for C1, C2 and C3 internal environments (ISO 12944); for dry internal (C1) environments no topcoat is required
  • Tested and assessed to EN13381-8, BS476-20/21 and GB14907
  • CE Marked product, ETA 15/0524
  • Assessed to ETAG 018-2 for durability classifications Z1, Z2 and Y

Technical Info

Components: Single Pack
Type: Waterborne Intumescent Coating
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: max. 0.2 g/kg
Volume Solids: 70 +/- 3%
Suitable Substrates: Steelwork
Application Method: Airless Spray. Brush or Roller should only be used on small areas (touch up and repair)
Theoretical Coverage: 1.00 m2/l for 700 microns
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): 200 - 700 microns (8.0 - 28.0 mils) per coat
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: After minimum of 16 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Tap water (normally no thinner required)
Shelf Life: 12 months from date of production unopened
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use