*PPG Steelguard 802

SKU
id21148
***
This product is now discontinued.
Out of stock
Product Description

Please note, this product is now discontinued. Contact our technical team for a suitable alternative.

PPG Steelguard 802 is a single part, thin film, solvent borne intumescent coating for fire protection of  circular and rectangular hollow section structural steel.

Best Uses

PPG Steelguard 802 has a unique formulation for the protection of hollow sections. This intumescent coating provides up to 90 minutes protection against cellulosic fires. With the ability to apply up to 1000 microns in a single coat, Steelguard 802 is suitable for C1 - C4 internal and external environments. For internal C1 environments application is possible without a topcoat.

  • Fast drying
  • Short handling times
  • Suitable for off site or on site application
  • Weather resistant up to 12 months without topcoat if applied correctly

Application

Ensure to contact Promain's specialist intumescent team for application information for your individual requirements.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details
Components: Single Pack
Type: Intumescent
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: 255 g/L
Volume Solids: 75%
Suitable Substrates: For circular and rectangular hollow section fire protection
Application Method: Airless Spray, Brush, Roller
Theoretical Coverage: 1.07 m2 per litre for 700 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT): 200 -1000 microns
Induction Time: -
Pot Life: -
Surface Dry:
Overcoatable: After 4 hours at 20°C
Fully Cured:
Cleaner / Thinner: PPG Thinner 21-06
Shelf Life: At least 18 months when stored and dry
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.