Bedec Extra Flex Elastomeric Masonry Paint

SKU
id3292
Non Hazardous
This Bedec Extra Flex Masonry Paint has up to 400% elasticity for use over cracks. For roughcast, pebble-dash, brickwork, cement and concrete rendered surfaces.
Available in 5 Litres
From £59.22 £49.35
In stock
Only %1 left
Product Description

Bedec Extra Flex Masonry Paint is perfect for rough-cast, pebble dash, brickwork, cement, and concrete rendered surfaces, providing a smooth, long-lasting finish that stretches up to 400% to prevent further cracking.

Bedec Extra-Flex Masonry Paint is an ideal purchase for anyone looking to protect exterior masonry, such as roughcast, pebble-dash, brickwork, cement, and concrete rendered surfaces. The modified acrylic blend is a flexible, microporous protective coating that will flex with the substrate where movement causes cracking in conventional masonry paint. It can be applied to exterior masonry and previously painted surfaces after suitable preparation and can be used as an anti carbonation coating to help prevent concrete spalling.

Best Uses

Extra-Flex Masonry Paint is best used to bridge hairline cracks found in exterior walls. The modified acrylic blend is ideally suited for the protection of exterior masonry, roughcast, pebble-dash, brickwork, cement, and concrete rendered surfaces. This paint provides new and existing painted surfaces with a smooth, long-lasting finish that stretches up to 400% to aid the prevention of further cracking after the fine cracks have been bridged.

  • Smooth finish masonry paint
  • Long-lasting coating
  • Microporous
  • Flexible - prevents cracking
  • Fine crack bridging
  • Stretches up to 400%
  • Available to mix in pastel colours
  • Most colours available by special order.

Application

Bedec Extra-Flex Masonry Paint is suitable for application by brush, roller, airless spray, conventional spray, or HVLP equipment. This modified acrylic blend should not be applied at temperatures below 10°C or if rain is expected before the paint is touch dry. The paint has a theoretical coverage rate of 10m2 per litre depending on the surface and is touch dry in just two hours at 20°C, where relative humidity (RH) should not exceed 65%.

At this temperature, a second coat can be applied after four hours, although this time will need to be increased at lower temperatures. If in doubt, allow extra time for the paint to dry.

Bedec Extra-Flex Masonry Paint is not recommended for application to Fletton or Stock Bricks, or to walls that have been coated with Limewash. We can talk to you about a different coating if you need to coat one of the previously mentioned substrates. Our guide to painting exterior brickwork offers advice that will help you here.

Surface and Environment

Bedec Extra-Flex is a masonry paint. It can be used on a wide range of exterior masonry surfaces and works well in the outdoor environment to offer maximum protection and complete bridging to surfaces against further damages caused by weathering. It can be applied to a range of walls and is available in almost every colour when you contact our technical support team.

Technical Details
Components: One Part
Type: Water-based Acrylic
Finish: Smooth Satin
Stock Colours: Range of Stock Colours
Tintable: Upon Special Request, Depending on Quantity. Please note, bespoke tints are non-refundable / exchangeable.
VOC Content: 140.0g per Litre
Volume Solids: 48%
Suitable Substrates: Exterior Masonry, Roughcast, Pebble-dash, Brickwork, Cement and Concrete Rendered Surfaces
Application Method: Brush, Roller, Conventional H.V.L.P or Airless Spray
Theoretical Coverage: 9 -11 m2 per litre per coat
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 42 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 - 4 hours at 18°C
Overcoatable: 4 hours at 18°C
Fully Cured: 16 - 24 hours at 18°C
Cleaner / Thinner: Clean up with warm soapy water
Shelf Life: 24 months
Packaging: Available in 5 Litres
Product Video

Related Products