Hempadur 35560 WRAS Approved potable water is a solvent free, two component, high build, polyamine adduct cured epoxy paint which cures to a coating with good resistance to fresh water. Hempadur 35560 WRAS Approved can be used as a lining in potable water tanks and pipelines. Hempadur 35560 WRAS Approved has been approved by the Water Research Center, Great Britain for potable water up to 23°C .
Hempadur 35560 WRAS Approved can be used in tanks for potable water offshore and has been certified for use in potable tanks such as sectional Braithwaite tanks with volumes of 100 gallon / 380 litres or greater and pipes at 8 inches or greater.
Hempadur 35560 WRAS Approved should be only applied on to a dry and clean surface with a temperature that is above the dew point to avoid any condensation. The first two days of curing will require a relative 60% humidity.
Hempadur 35560 WRAS Approved can be used in tanks for potable water offshore as well as pipes that are or exceed 8 inches.
|Type:||Polyamide Adduct Cured Epoxy|
|Stock Colours:||20320 Cream and 50900 Light Red|
|Tintable:||Yes, on request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||0.0g per Litre|
|Suitable Substrates:||For steel|
|Application Method:||Brush or Airless Spray|
|Theoretical Coverage:||5 m2 per litre at 200 microns|
|Wet Film Thickness (WFT):||See data sheet|
|Dry Film Thickness (DFT):||See data sheet|
|Pot Life:||1.5 hours at 20°C|
|Touch Dry:||10 hours at 20°C|
|Overcoatable:||See data sheet|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Clean with HEMPEL'S TOOL CLEANER 99610. Do not thin.|
|Shelf Life:||3 years for BASE and 1 year (25°C/77°F) for CURING AGENT from time of production|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.