PPG SigmaFast 278

SKU
ID10094
Part A: UN3470 (Class: 8.3, Grp: II) Part B: UN1263 (Class: 3, Pk Grp: III)
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°C.
Available in 4 and 20 Litres
From £76.14 £63.45
In stock
Only %1 left
Product Description

PPG SigmaFast 278 is a 2 component high solids rapid drying zinc phosphate epoxy primer and build coat that has been formulated to cure at low temperatures down to -5°C.

Best Uses

PPG SigmaFast 278 also offers excellent corrosion resistance when exposed to atmospheric conditions. SigmaFast 278 is available in a limited range of MIO colours in a flat matt finish.

PPG SigmaFast 278 is formulated for application to blast cleaned to ISO Sa2 1/2 steel although manual cleaning can be carried out with power tools. 278 is also suitable for application to galvanized steel providing it has been de-greased, any salts removed and the surface must also be keyed.

Application

Any thinning must be by the addition of PPG Thinners 91-92 and application should be by airless spray though application by a solvent resistant mini roller is possible and due to the thixotropic nature of the paint application by brush may result in brush marks being evident.

As SigmaFast 278 is an epoxy coating and not a polyurethane if it is intended that the 278 is used as a finished top coat chalking and turning slightly yellow may result form UV degradation although this will not have any effect on the paints performance. Even if the paint has suffered from any yellowing due to the unlimited over coating time of the paint a UV stable top coat can be applied at a later date.

Technical Details

Approvals

  • ISO 12944-6 Systems For Steel - C3 High at 150 microns DFT
  • ISO 12944-6 Systems For Steel - C4 High at 170 microns DFT
  • ISO 12944-6 Systems For Steel - C4 High at 200 microns DFT
  • ISO 12944-6 Systems For Steel - C5-I High at 200 microns DFT
  • Norsok M-501 System 2B
  • Norsok M-501 System 6A
  • Norsok M-501 System 6B

Technical

  • Epoxy Primer and Build Coat for protective coatings systems
  • Wide application range
  • Easy application by airless spray
  • Speed curing in shop steel fabrication
  • Good adhesion to steel and galvanised steel
  • Excellent corrosion resistance in atmospheric exposure
  • Cures at temperatures down to -5°C
  • Epoxies will yellow over time - this is more noticable in white and off white colours. This product is ideal for non cosmetic areas
Components: Two Part
Type: Zinc Phosphate Epoxy
Finish: Semi Gloss
Stock Colours: Red Brown, Grey and a selected range of colours inc MIO
Tintable: No
VOC Content: 230.0g per Litre
Volume Solids: 80%
Suitable Substrates: For steel, galvanized steel, primed steel
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: m2 per litre at microns
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT): 75 - 250 microns
Induction Time: -
Pot Life: 1 hour at 20°C
Touch Dry: 1 hour at 20°C
Overcoatable: Maximum 2 hours at 20°C
Fully Cured: 3 days at 20°C
Cleaner / Thinner:  
Shelf Life: At least 24 months when stored cool and dry
Packaging: Available in 4 Litres and 20 Litres

Related Products