Zinsser Watertite Basement Waterproofing Paint

SKU
ID3405
UN1263 (Class: 3, Pk Grp: III)
Paint for Waterproofing Basements use on Damp and Wet Walls, stops up to 34 lbs of water pressure.
Available in 5 and 10 Litres
From £90.37 £75.31
In stock
Only %1 left
Product Description

Zinsser Watertite Basement Waterproofing Paint is suitable for damp proofing basements. Helps prevent water ingress and can withstand up to 34 lbs (2.3 Bar) of water pressure.

Best Uses

Zinsser Watertite Basement Waterproofing Paint is a ready to use coating formulated to waterproof interior and exterior concrete, stucco, cement, cinder block and other masonry surfaces. It is ideal for interior basement walls and for sealing concrete basement slabs prior to installing flooring (not recommended for regular foot traffic). It is also a great product for using on exterior foundations and retaining walls, above and below grade.

Zinsser Watertite has been formulated using Portland cement in conjunction with anti-fungal additives which prevent water ingress and mould.

The best use for Zinsser Watertite is a base coat. This product can be tinted to pastel shades to help with the opacity of your chosen topcoat. We would recommend the use of Zinsser Permawhite as a decorative mould resistant topcoat. Zinsser Watertite cannot be tinted to specific pastel shades. It cannot be tinted to dark colours at all.

Application

Stir thoroughly before and during application. Do not thin. Apply when air and surface temperatures are 10°C or higher. Do not apply if heavy rain is expected within 24 hours. Liberally apply the first coat using a thick polyester bristle brush, or by rolling a small section (1m x 1m), and then using a brush to work the coating into the pores of the masonry. Apply as much paint as necessary to produce a continuous, pinhole free film.

Use a 20-25mm nap roller for unpainted, porous surfaces, and use an 18mm nap roller for smooth or previously painted surfaces. The second coat can be brushed or rolled. Do not over spread. Zinsser Watertite is a two coat system. The first coat primes and seals the surface. The second coat completes the sealing process to ensure protection against water intrusion.

After two coats of Watertite have been applied, it can be left as a white finish. If you require a colour, it is recommended the two coats are overcoated with a mould resistant topcoat such as Zinsser Permawhite or Glixtone Fungishield.

Surface and Environment

Zinsser Watertite Basements Waterproofing Paint has been specially designed for use in environments where dampness and mould is of great concern, primarily in basements. Zinsser Watertite Basements Waterproofing Paint forms an impermeable membrane barrier to water on interior or exterior, vertical or horizontal concrete block, cast-in-place concrete slab and cementitious stucco.

Technical Details

Notes

  • Watertite waterproofing paint is a multi-purpose, latex-based concrete and masonry waterproofing primer and a finish that is GUARANTEED to keep water out and mould and mildew away
  • Watertite forms an impermeable membrane barrier to water on any interior or exterior, vertical or horizontal concrete block, cast-in-place concrete slab and cementitious stucco
  • Watertite is the most effective basement waterproofing paint available
  • It prevents the growth of mould and mildew on the paint film for 5 years guaranteed
  • Use Watertite on smooth, dense and previously painted surfaces
  • Two coats of Watertite paint must always be applied
  • Ideal for alkaline surfaces with a pH of up to 12.5

Technical Info

Components: One Part
Type: Solvent Based Acrylic
Finish: Matt
Stock Colours: White
Tintable: This product can be tinted to pastel shades to help with the opacity of your chosen topcoat. We would recommend the use of Zinsser Permawhite as a decorative mould resistant topcoat. Zinsser Watertite cannot be tinted to specific pastel shades. It cannot be tinted to dark colours at all. Please note, bespoke tints are non-refundable / exchangeable.
VOC Content: Less than 350.0g per Litre
Volume Solids: 48%
Suitable Substrates: Formulated to waterproof interior and exterior concrete, stucco, cement, cinder block and other masonry surfaces. It is ideal for interior basement walls and for sealing concrete basement slabs prior to installing flooring (not recommended for foot traffic). It is also great for exterior foundations and retaining walls, above and below grade.
Application Method: Thick Polyester Bristle Brush, Napped Roller
Theoretical Coverage: 2 m2 per litre on rough surfaces, on smooth, denser surfaces, and those previously painted, apply the first coat as rough. The second coat can be applied at a rate of 2.5m2 per litre.
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: After 4 hours at 20°C
Fully Cured: 7 - 14 days at 20°C
Cleaner / Thinner: Zinsser BIN Brush Cleaner
Shelf Life: 3 Years Unopened
Packaging: Available in 5 and 10 Litres

Related Products