Pronto 203:042 QD Sheen Primer Finish

UN1263 (Class: 3, Pk Grp: III)
An economical one coat primer/finish. Quick drying with high sheen level
Available in 5 and 20 Litres (4 x 5 Litres)
From £53.96 £44.97
In stock
Only %1 left
Product Description

Pronto 203:042 QD Sheen Primer Finish is an economical one coat primer/finish, with a higher sheen level than usual for the customer who wants their steel articles to look good without costing the earth.

Best Uses

Pronto 203:042 QD Sheen Primer Finish yields a quick drying high sheen finish to give a good all round durable finish resistant to mild chemicals, with good exterior durability, corrosion resistance, salt spray and excellent re-overcoating properties. Ideal for skips, containers and metal bins.

Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.


Clean and degrease steel substrate. Rust burrs and oily residues should be removed completely. Sharp edges at welded seams should be ground down. Weld splatter, dust, scale, etc. should be removed. The resultant surface should be dry and free from lamination and dust.

Mix thoroughly before use. Apply a full even coat. Painting should only be carried out under good atmospheric and clement weather. Painting and preparation should never be undertaken: During fog, mist, snow, or when rain is imminent. When the surface to be painted is wet with condensation or when condensation may occur during the initial drying period.

Excellent re-overcoating properties under normal conditions of temperature and humidity. Can be overcoated with most Xylene based topcoats anytime after through dry (de-nibbing may be required to promote good adhesion).

Technical Details
Components: One Part
Type: Solvent Based
Finish: High Sheen
Stock Colours: 08-E-51, RAL 6005, RAL 9006, White, Black, 00-A-05, 18-B-25
Tintable: Yes, Available in a wide range of colours including most British Standard and RAL Shades. Corporate, bespoke and other shades available by arrangement. Some colours contain lead chromate so please state when ordering if lead free pigmentation is required. Please note, bespoke tints are non refundable / exchangeable
VOC Content:
Volume Solids: 42%
Suitable Substrates: For steel
Application Method: Airless Spray, Air Assisted Spray or Conventional Spray
Theoretical Coverage: 5m2 per litre at 85 microns
Wet Film Thickness (WFT): 190 - 230 microns
Dry Film Thickness (DFT): 85 microns
Induction Time: -
Pot Life: -
Touch Dry: 15 minutes at 20°C
Handle Dry: 2 - 4 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Clean all equipment immediately after use with the above solvent. Ensure all lines, tips, etc. are thoroughly flushed out. It is not sufficient to leave equipment filled up with solvent/thinner. Pronto Q.D. Thinners 003:000:9999
Shelf Life: 6 months dependent on temperature and conditions.
Packaging: Available in 5 and 20 Litres (4 x 5 Litres)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use