Centrecoat Polyurethane Floor Paint

SKU
id25150
UN1263 (Class: 3, Pk Grp: III)
A single pack, durable, polyurethane floor coating. 00-A-05 available for next day delivery.
Available in 5 Litres. Tintable to most RAL and BS shades.
From £54.13 £45.11
In stock
Only %1 left
Product Description

Centrecoat Polyurethane Floor Paint is a single pack, durable, polyurethane floor coating that gives good resistance to most chemicals expected in garages and warehouses.

00-A-05 stock colour available for next day delivery. Other colours by special order.

Best Uses

Centrecoat Polyurethane Floor Paint is resistant to splashing with petrol, lubricating oils, mild alkalis, dilute mineral acids (including battery acids), grease and water. Provides a smooth finish with a high sheen.

This single pack durable floor paint is ideal for garages and small warehouses.

Application

Concrete should be clean, dry and free from dust, dirt, grease and other contaminates etc. All surfaces to be coated should be dry (the concrete should have a moisture content below 6%. Power–floated floors should be abraded/acid etched to provide a key for the coating.

For Previously Painted Floors:
As with all coating applications, suitable pre-treatment of the floor is of the utmost importance. Old paint especially with suspect adhesion or of an unknown type should be completely removed. Some paints however may still lift, be softened, or cause poor inter-coat adhesion when this system is applied on top of them. So, it is always advisable to check for suitability and defects by undertaking small-scale trials. If the old paint is satisfactory, clean and abrade the surface in the normal way.

For Heavily Contaminated Floors:
Centrecoat Polyurethane Floor Paint will not adhere satisfactorily to heavy deposits of grease, oils etc. It will be necessary to mechanically abrade the floor to remove the excess contamination.

For New Floors/Uncoated Surfaces:
For most surfaces two coats should be sufficient. The first coat should be thinned 20%-30% to act as a sealer using Centrecoat HB Anti-Corrosive Cladding Paint Thinners. This should be followed by one or two coats of the Centrecoat Polyurethane Floor Paint (unthinned). It is important to allow overnight drying between the coats. Apply via brush or roller.

Technical Details
Components: Single Pack
Type: Polyurethane
Finish: High sheen (available in a Matt finish, subject to minimum order quantity)
Stock Colours: 00-A-05
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:  
Volume Solids: 45%
Suitable Substrates: For concrete floors
Application Method: Brush or Roller
Theoretical Coverage: Expected coverage is 8m2 per litre. This will depend on the film thickness applied, the surface profile and the porosity of the floor being painted.
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT): 30 - 50 microns per coat
Induction Time: -
Pot Life: -
Touch Dry: 3 hours at 20°C
Foot Traffic: Overnight at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Centrecoat HB Anti-Corrosive Cladding Paint Thinners
Shelf Life: 12 months when stored indoors in original unopened containers and not subjected to extremes of temperature. Mix thoroughly before use.
Packaging: Available in 5 Litres

Related Products