Tensid Tavec 201 is a biodegradable multiple layer paint stripper, formulated for removal of most paint types, urethanes and other coatings.
Tensid Tavec 201 stripper can be used for most paint types and works by stripping multiple layers of paint. Environmentally friendly as non chemical paint waste and benefits from being biodegradable.
Suitable for use on marble, travertine, limestone, granite, sandstone, slate, fired clays such as brick, tile, terracotta and pavers, concrete, wood and glass.
Protect surrounding surfaces and beware of wind drift. Apply with a chemical resistant brush or airless spray equipment (Pressure - 2000 psi, Nozzle - 0.021 - 0.031 and Spray tip - 65 - 80 degree). Always test each type of surface to ensure suitability and desired results. Apply test area according to the following application procedures.
Apply a uniform coating of Tensid Tavec 201 so the paint is no longer visible to a dry surface. The most effective method is by airless sprayer, however a brush can be used. Allow the stripper to remain on the surface for 30 minutes – 24 hours. On multiple layers it may be necessary to remove the lifted layers and re-apply the product. Do not allow the product to dry on the surface. Pressure rinse with water. Hot water may improve the efficiency of stripping. Alternatively, remove dissolved paint with a spatula and rinse area thoroughly with clean water.
Re-application may be necessary, but ensure surface is dry prior to application of the stripper. Do not allow product to come into contact with rubber or plastic. Wear suitable PPE – Chemical resistant goggles and neoprene/rubber gloves to avoid splash to bare skin or eyes.
|Stock Colours:||Greenish creamy paste|
|Suitable Substrates:||Suitable for use on marble, travertine, limestone, granite, sandstone, slate, fired clays such as brick, tile, terracotta and pavers, concrete, wood and glass. Test first.|
|Application Method:||Airless Spray or Chemical Resistant Brush|
|Theoretical Coverage:||1 - 4 m2 per litre depending on substrate|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||-|
|Shelf Life:||May be stored for up to 1 year in a tightly sealed, unopened container, and in a frost free environment|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.