Hempel Hempadur 35560 - WRAS Approved

SKU
id4344
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: III)
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.
Available in 20 Litres
From £387.55 £322.96
In stock
Only %1 left
Product Description

Hempel Hempadur 35560 WRAS Approved potable water is a solvent free, two component, high build paint for water tanks and pipelines.

Hempadur 35560 WRAS Approved potable water is a solvent free, two component, high build, polyamine adduct cured epoxy paint which cures to a coating with good resistance to fresh water. Hempadur 35560 WRAS Approved can be used as a lining in potable water tanks and pipelines. Hempel Hempadur 35560 WRAS Approved has been approved by the Water Research Center, Great Britain for potable water up to 23°C.

Hempel Hempadur 35560 is also ideal for use on sand silos after preparation via grit blasting.

Best Uses

Hempadur 35560 WRAS Approved can be used in tanks for potable water offshore and has been certified for use in potable tanks such as sectional Braithwaite tanks with volumes of 100 gallon / 380 litres or greater and pipes at 8 inches or greater.

Application

Hempadur 35560 WRAS Approved should be only applied on to a dry and clean surface with a temperature that is above the dew point to avoid any condensation. The first two days of curing will require a relative 60% humidity.

Surface and Environment

Hempadur 35560 WRAS Approved can be used in tanks for potable water offshore as well as pipes that are or exceed 8 inches.

Technical Details

Approvals

  • Approved by WRAS for potable water up to 35°C/95°F - WRAS Approval 1807559
  • Certified by NSF International to NSF/ANSI standard 61- Drinking Water System Components - Health Effects
  • Tested according to section 175.300 of the Code of Federal Regulations Title 21 - Liquid and Dry Foodstuff
  • Approved by Folkehelseinstituttet, Norway, for use in tanks for potable water offshore.
  • Norsok M-501 system no. 3A
  • Norsok M-501 system no. 7A (Pre-Qualified)

Technical Info

Components: Two Part
Type: Polyamide Adduct Cured Epoxy
Finish: Gloss
Stock Colours: 20320 Cream and 50900 Light Red
Tintable: Yes, on request. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 0.0g per Litre
Volume Solids: 100%
Suitable Substrates: For steel
Application Method: Brush or Airless Spray
Theoretical Coverage: 5 m2 per litre at 200 microns
Wet Film Thickness (WFT): See data sheet
Dry Film Thickness (DFT): See data sheet
Induction Time: -
Pot Life: 1.5 hours at 20°C
Touch Dry: 10 hours at 20°C
Overcoatable: See data sheet
Fully Cured: 7 days at 20°C
Cleaner / Thinner:  Clean with HEMPEL'S TOOL CLEANER 99610. Do not thin.
Shelf Life: 3 years for BASE and 1 year (25°C/77°F) for CURING AGENT from time of production
Packaging: Available in 20 Litres

Related Products