Hempel Hempathane HS 55610 is a two component, polyurethane, acrylic topcoat, cured with aliphatic isocyanate, containing zinc phosphate, with good gloss and colour retention.
BBA Cert No. 08/H135-PS13 Highways Agency Approved Item No.169. This product is part of the Network Rail Specification NR/L3/CIV/039
Hempel Hempathane HS 55610 is best used for providing a decorative top-coat in a range of deep, pale and strong shades, to structural steel in anti corrosive environments.
Hempel Hempathane HS 55610 can be applied using spray application for a theoretical coverage rate of 6.5m2 per litre per coat and works best when 2 coats are applied to the substrate.
Surface and Environment
Hempel Hempathane HS 55610 can be used in all environments exposed to high levels of corrosion and is ideally suited for marine, industrial and construction areas, for use on structural steel.
- This product is part of the Network Rail Specification NR/L3/CIV/039
- Certificate number M20/181, M20/183, M20/184, M21/034, M24/069, N1/109, N2/034, N4/104 and N9/036
- Highways Agency Approved. Item number 169
- BBA Cert No. 08/H135-PS13
|Stock Colours:||Just tints|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||337.0g per Litre|
|Suitable Substrates:||For steel|
|Application Method:||Brush or Airless Spray|
|Theoretical Coverage:||6.7 m2 per litre|
|Wet Film Thickness (WFT):||See data sheet|
|Dry Film Thickness (DFT):||See data sheet|
|Pot Life:||2 hours at 20°C|
|Touch Dry:||3 hours at 20°C|
|Overcoatable:||See data sheet|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||HEMPEL'S THINNER 08080|
|Shelf Life:||3 years for BASE and 2 years (25°C/77°F) for CURING AGENT from time of production|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.