Hempel Hempadur Mastic 45880 is a self-primed, surface tolerant coating with good wetting properties and has low temperature curing properties. Also suitable as an industrial floor paint.
This product is part of the Network Rail Specification NR/L3/CIV/039.
Hempadur Mastic 45880 is a two-component adduct cured, high solids, high build epoxy paint. With a tough coating and good wetting properties, together with low temperature curing, Hempadur Mastic 45880 will provide a good surface finish, at lower temperatures.
Hempadur Mastic 45880 is ideal as a self primed, surface tolerant paint system or as an intermediate or finishing coat in heavy duty paint systems where low VOC and high film build are required.
For immersed areas Hempel Hempadur Mastic 45880 is only recommended for minor repairs as primer, and full applications as intermediate or topcoat. Can be specified where extended recoating properties for polyurethane topcoats are requested (typically travel coating). May be used directly on cured zinc silicate (Hempel Galvasil products) or spray metallized surfaces to minimize popping.
Shade 18600 can be used in paint systems complying with European ATEX Regulation EN 13463-1: 2001. Please also note that Shade 18600 will have a lower gloss than usual for other shades.
Hempadur Mastic 45880 should be applied on dry and clean surfaces with temperatures above dew point. It is recommended that Hempadur Mastic 45880 is applied with an airless spray.
Surface and Environment
Hempadur Mastic 45880 is a self-primed, surface tolerant paint system which can be used as an intermediate or finishing coat in heavy duty paint systems where low VOC and high film build are required. Hempadur Mastic 45880 can also be used for the application of multiple coatings in immersed areas such as ballast tanks and underwater hulls.
- Hempadur Mastic 45880 is part of the Network Rail Specification NR/L3/CIV/039
- Certificate number M20/181, M20/183, M20/184, M20/186, M20/187 and M20/188 and M24/069
- Highways Agency Approved Item: HA Item No.115, 116
- NATO Approval No. 8010-99-264-0387 (10000 White 5 Litres)
|Type:||Polyamide Adduct Cured|
|Stock Colours:||12170 Grey|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||216.0g per Litre|
|Suitable Substrates:||For steel, concrete, metal substrates|
|Application Method:||Brush or Airless Spray|
|Theoretical Coverage:||6.4 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||150 microns|
|Dry Film Thickness (DFT):||125 microns|
|Pot Life:||1 hour at 20°C|
|Touch Dry:||3 hours at 20°C|
|Overcoatable:||See data sheet|
|Fully Cured:||14 days at 20°C|
|Cleaner / Thinner:||Clean tools with HEMPEL'S TOOL CLEANER 99610. Thin if neccessary with < 5% HEMPEL'S THINNER 08450|
|Shelf Life:||3 years for BASE and 3 years (25°C/77°F) for CURING AGENT from time of production|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.