International Interfine 691

SKU id18650 Part A and B: UN1263 (Class: 3, Pk Grp: III)
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
Available in 4 and 15 Litres. Tintable to a full range of colours
£77.00 (£92.40 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£77.00 (£92.40 Inc VAT)

Product Description

International Interfine 691 is a two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat in both new construction and industrial maintenance.

Approved for use on London Underground, Highways and Network Rail applications. See technical tab for approvals.

Best Uses

International Interfine 691 is designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and power plants. Suitable for both site and factory application situations and is ideal where legislation prevents the use of isocyanates.

International Interfine 691 offers equivalent performance to typical recoatable polyurethane cosmetic finishes.

Application

All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000.

Primed Surfaces
Interfine 691 should always be applied over a recommended anti-corrosive coating scheme. The primer surface should be dry and free from all contamination and Interfine 691 must be applied within the overcoating intervals specified (consult the relevant product data sheet). Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO 8501-1:2007) or SSPC-SP6, Abrasive Blasting, or SSPC-SP11, Power Tool Cleaning) and patch primed prior to the application of Interfine 691.

Material is supplied in two containers as a unit. Always mix a complete unit in the proportions supplied. Once the unit has been mixed it must be used within the working pot life specified. Apply using Airless Spray, Conventional Spray, Brush or Roller.

Recommended Products To Use


International Interseal 670HS

International Interseal 670HS

For use on a wide variety of substrates including hand prepared rusty steel.

£99.00 (£118.80 Inc VAT)
International Intercure 200

International Intercure 200

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

£273.00 (£327.60 Inc VAT)
International Intergard 251

International Intergard 251

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

£224.00 (£268.80 Inc VAT)
International Intergard 410

International Intergard 410

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

£63.00 (£75.60 Inc VAT)
International Intergard 475HS

International Intergard 475HS

A low VOC, high solids, high build, two component epoxy coating.

£339.00 (£406.80 Inc VAT)
International Interplus 356

International Interplus 356

A low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C), surface tolerant...

£103.00 (£123.60 Inc VAT)
International Intergard 269

International Intergard 269

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

£44.00 (£52.80 Inc VAT)
International Thinner GTA007

International Thinner GTA007

Suitable for thinning paints and equipment cleaning from International Paints.

£38.00 (£45.60 Inc VAT)