Remmers Add TX is an organic thixotropic powder agent for Remmers synthetic resins.
Remmers Add TX is an odourless powder for use within suitable Remmers synthetic resins. When using Remmers Add TX, the degree of filling and working directions are determined by the specific application and the resin/hardener system used. The amount of thixotropic agent used also depends on the temperature of the material and air, and the method of incorporation.
Thixotropising influences the original coating's material properties. Further notes on working, system construction and maintenance of the listed products can be found in the appropriate Remmers product data sheet and the system recommendations.
Depending on application and binder basis, approx. 1-10% by mass based on the binder should be incorporated in the coating.
- Grain Density: 1.1 g per cm3
- Form: Fibres
- Available in 5 Kg
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.