Remmers Copper Tape is sold in rolls that are 16.5m long.
Possible system products:
The substrate must be load-bearing, dimensionally stable, solid, free of loose parts, dust, oils, grease as well as other substances that could interfere with adhesion. It must be primed so as to remove all surface pores. Before the application of the product a smooth surface must be produced, e.g. with a scratch coat.
Suitable Remmers epoxy primers, epoxy scratch coats or epoxy mortars must always be used. See the current Technical Data Sheet of the product in question and the system recommendations for more detailed information.
Install earthing elements and copper strands prior to application, based on the size and shape of the surface. Make sure that no point on the surface is more than 10 m from an earthing point or a connected copper strand.
See technical tab for downloadable System Sheets.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.