Remmers Epoxy ESD Color 3K benefits from being able to withstand mechanical and chemical loads, so is ideal for warehouse use where hand pallet trucks and forklift trucks are used. Formulated for professional use within a Remmers Electro Static Dissipating area.
Possible System Products:
The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion. The adhesive pull strength of the surface after priming must be at least 1.5 N/mm² on average (smallest single value min. 1.0 N/mm²), compressive strength at least 25 N/mm². Suitable Remmers epoxy primers, epoxy scratch coats or epoxy mortars must always be used.
Before the application of the product a smooth surface must be produced, e.g. with a scratch coat. Refer to the current Technical Data Sheet for detailed information on the single products. Epoxy Conductive must be applied according to the current Technical Data Sheet as transverse conducting layer.
Pour the material onto the prepared substrate and then distribute with suitable means, e.g. a toothed trowel or toothed spreader. Afterwards roll over with a (metal) spiked roller.
See technical tab for downloadable System Sheets.
|Stock Colours:||6666 Pebble Grey|
|Tintable:||Yes, but only on orders over 150 Kg. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||<500 g/L|
|Suitable Substrates:||Within a Remmers ESD flooring system.|
|Application Method:||Toothed trowel, notched spreader, spiked roller|
|Theoretical Coverage:||Approx. 2.5 - 3.0 kg/m2 mixture|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Pot Life:||25 minutes at 20°C|
|Foot Traffic:||1 day at 20°C|
|Mechanical Loading:||3 days at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Clean tools, equipment and splashed material immediately while fresh with Remmers V 101 Thinner.|
|Shelf Life:||If stored unopened in the original container and kept cool, dry and protected from frost, min. 12 months (component A)/min. 24 months (component B).|
|Packaging:||Available in 30 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.