£7.75 delivery on orders excluding certain products & postcodes *
Remmers Induline Fast Filler is formulated for the repair and preparation of external wood and mineral substrates prior to application of a Remmers coating. Ideal for the filling of porous substrates and voids.
Remmers Induline Fast Filler is part of Remmers Render System for application and protection of park homes, static homes, mobile units and other portable, temporary buildings. Suitable for application to external renders constructed from OSB and MgO board and concrete façades.
Clean voids and fill in gaps using a spatula applying light pressure. Refill larger voids after a drying time of approx 3 hours at 20°C. Maximum layer thickness 3mm per application.
To be used outdoors only with the correspondent resistant coating. Test unknown coating systems for incompatibility. Not suitable for areas which are prone to corrosion. Can be sanded/coated: after approx. 3 hours at 20°C.
Components: | Single Pack |
Type: | Filler |
Finish: | |
Stock Colours: | White |
Tintable: | No |
VOC Content: | |
Density: | 1.8 g/ml |
Suitable Substrates: | External wood and mineral substrates |
Application Method: | Spatula |
Theoretical Coverage: | Dependant on substrate |
Wet Film Thickness (WFT): | Max 3mm depth per application |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | - |
Surface Dry: | 30 minutes at 20°C |
Sandable: | After 3 hours minimum at 20°C |
Fully Cured: | |
Cleaner / Thinner: | Cleaning with water directly after use or with Teknos Aqua RK-898-Cleaning Concentrate for persistent contamination. |
Shelf Life: | If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months. |
Packaging: | Available in Packs of 12x 400ml tubes |