Remmers PUR Aqua Top 2K M Plus is a slip resistant, silk matt sealant for use within Remmers flooring systems subject to light mechanical loads.
Remmers PUR Aqua Top 2K M Plus is formulated for use within Remmers flooring systems as a slip resistant sealer for floors subject to light mechanical loads.
This clear sealer benefits from being light fast, water vapour diffusion capable and slip resistant.
Possible system products include Remmers Epoxy OS Color (6980), Remmers PUR Deco Color New (6674) and Remmers Epoxy BS 3000 SG (6380).
The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion. The substrate must be prepared using suitable Remmers products.
Apply the sealant within 48 hours. In the case of longer waiting times, sand the surface treated in the previous coat and remove dust.
|VOC Content:||<140 g/L|
|Suitable Substrates:||As part of a floor system|
|Application Method:||25 cm epoxy roller to apply uniformly and generously, working crosswise, then roll using a 50 cm epoxy roller saturated with material. Replace the rollers with new ones every 30 minutes.|
|Theoretical Coverage:||Approx 0.13 Kg per m2|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Pot Life:||60 minutes at 20°C|
|Foot Traffic:||8 hours at 20°C|
|Mechnical Loading:||3 days at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Clean tools, equipment and any splashed material immediately with water while still fresh.|
|Shelf Life:||If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 6 months.|
|Packaging:||Available in 2.5 and 10 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.