Remmers PUR Aqua Top 500 2K M

A transparent, silk matt sealant for use over Remmers floor coatings as part of a system.

Available in 1 and 10 Kg

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£40.36

Inc VAT £48.43

PRODUCT DETAILS

Remmers PUR Aqua Top 500 2K M is a transparent, silk matt sealant for use over Remmers floor coatings as part of a system.

Best Uses

Remmers PUR Aqua Top 500 2K M is formulated as a sealant on Remmers epoxy coatings and also for fixing and sealing Remmers flake coatings for floors. This clear floor sealant provides a slip resistant, light fast finish that s water vapour diffusion capable.

Suitable for use over Remmers Epoxy OS Color (6980) and Remmers PUR Deco Color New (6674).

Application

The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion. The substrate must be prepared using suitable Remmers products.

Apply the sealant within 48 hours. In the case of longer waiting times, sand the surface treated in the previous coat and remove dust. Mix both components for a minimum of 3 minutes. Combine and mix for 3 minutes.

For Use As A Fixation Layer for Flake Coatings
Pour the material generously onto the surface. Use a suitable 25 cm epoxy roller to apply uniformly and generously, working crosswise, then roll using a 50 cm epoxy roller saturated with material. Replace the rollers with new ones every 30 minutes. Always work wet-on-wet. Make sure that no pools form.
Application rate approx. 0.15 - 0.20 kg/m2 binder

For Use As A Sealant
Pour the material generously onto the surface. Use a suitable 25 cm epoxy roller to apply uniformly and generously, working crosswise, then roll using a 50 cm epoxy roller saturated with material. Replace the rollers with new ones every 30 minutes. Always work wet-on-wet. Make sure that no pools form.
Application rate approx. 0.15 - 0.20 kg/m2 binder

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu

TECHNICAL

Approvals

AbZ-156.605-1414 DIBt WDD (New) (2014-2019)
Fire test (classification) SL Colorid WDD
Fire test (classification) SL Floor WDD Flake
Fire test (classification) SL Floor Flex
General building inspectorate approval SL Floor Flex
Certificate of compliance SL Floor Flex
AbZ-156.605-1487 DIBt SL Floor Flex (2015-2020)
AbZ-156.605-1594 DIBt Remmers EP systems with Epoxy OS Color New (2015-2020)

Technical Info

Components:	Two Pack
Type:	Water Based
Finish:	Silk Matt
Stock Colours:	Transparent
Tintable:	No
VOC Content:	<140 g/L
Volume Solids:	43%
Suitable Substrates:	Over Remmers Flooring Systems
Application Method:	25 cm epoxy roller, 50 cm epoxy roller
Theoretical Coverage:	0.15 - 0.20 Kg per m2
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time:	-
Pot Life:	60 minutes at 20°C
Foot Traffic:	8 hours at 20°C
Overcoatable:	From 8 hours to 48 hours max at 20°C
Fully Cured:	7 days at 20°C
Cleaner / Thinner:	Clean tools, equipment and any splashed material immediately with water while still fresh.
Shelf Life:	If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
Packaging:	Available in 1 and 10 Kg