Remmers QP Color is a very fast reacting pigmented coating for use as either a base coat or top sealant in Remmers flooring systems.
Remmers QP Color is a pigmented coating for use as a base coat for blind coatings, a base coat for flake coatings or as a top sealant for blind coatings.
- High UV resistance
- Full curing at temperatures from 0°C
- Resistant to wear
- Can be subjected to mechanical loads
- Can be subjected to chemical loads
The substrate must be loadbearing, dimensionally stable, sound, free of loose constituents, dust, oil, grease, rubber tyre marks and other substances that could interfere with adhesion. Tensile strength of the surface of the substrate must be 1.5 N/mm² on average (smallest value of at least 1,0 N/mm²) and compressive strength at least 25 N/mm². The use of suitable Remmers epoxy primers or scratch coats is mandatory.
The use as coating on Remmers MB 2K is possible. Please refer to the current Technical Data Sheets of the single products as well as to the Remmers system recommendations for further details.
|Stock Colours:||RAL 7032, RAL 7035, RAL 7001|
|VOC Content:||500.0g per Litre|
|Suitable Substrates:||For flooring|
|Application Method:||Toothed trowel, toothed squeegee, rubber squeegee, epoxy roller, smoothing trowel.|
|Theoretical Coverage:||Dependant on Application|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Induction Time:||3 minutes at 20°C|
|Pot Life:||30 minutes at 20°C|
|Touch Dry:||Dependant on Application|
|Overcoatable:||Dependant on Application|
|Fully Cured:||Dependant on Application|
|Cleaner / Thinner:||Clean tools, equipment and splashed material immediately while fresh with Remmers V101 Thinner|
|Shelf Life:||At least 12 months in unopened and unmixed, original containers stored cool but frost-free.|
|Packaging:||Available in 11.2 and 28 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.