Remmers Rofalin Acryl is an acrylate based weather protective paint for use on wood internally or externally.
Remmers Rofalin Acrylic can be used indoors and outdoors on new and old wood. However, it is also particularly suitable for renovating old, already coated surfaces and can also be used on render, masonry work, concrete, weathered fibrated cement, zinc roof gutters, zinc sheet metal and many other substrates.
Remmers Rofalin Acryl is suitable for application to chairs, banks, etc. An additional protective topcoat must be applied to prevent abrasion of pigments.
Rofalin Acrylic is an environmentally friendly, protective paint on a pure acrylate base with lightfast pigments for wood and other substrates. Rofalin Acrylic is easy to apply, protects the substrate for many years and is low solvent. The properly applied, elasticised coating does not peel even under extreme weather conditions and is driving rain tight, lightfast and weather resistant, fast drying, low odour, matt and scrub-proof pursuant to DIN 53778.
Rofalin Acrylic also has very good hiding power.
Normally, two coats of undiluted Rofalin Acrylic are applied by brush, roller or with airless spraying equipment. On highly absorbent substrates, the first coat should be thinned with 10% water. Wood in outdoor areas should always be pre-treated with a wood preservative (e.g. Remmers Wood Preservative Primer*). The substrate must be dry and load bearing. The penetration of moisture from behind must be ruled out.
Repair any cracks according to valid rules of the trade. To prevent coloured substances in the wood from bleeding through the paint when white or light shades of Rofalin Acrylic are used, prime first with 2 coats of Remmers Sealing Primer. When coating, observe the BFS Code of Practice No. 18 "Coating wood and wooden working materials in outdoor areas”.
|Stock Colours:||RAL 9016, Grey, Dark Brown, Black|
|Tintable:||Yes, on request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||130 g/L|
|Suitable Substrates:||For wood, metal, render, gypsum render, wallpaper, interior masonry|
|Application Method:||Brush, Roller, Airmix or Airless Spray|
|Theoretical Coverage:||80 - 100 ml per m2 per coat|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 4 hours minimum at 23°C|
|Fully Cured:||14 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||At least 12 months stored cool and frost-free in closed, original containers|
|Packaging:||Available in 10 and 20 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.