Remmers Rust Inhibitor M

SKU
id17601
Non Hazardous
Additive for the production of a durable corrosion inhibiting coating made with Betofix RM or Betofix R2.
Available in 5 Kg
£81.77 £68.14
In stock
Product Description

Remmers Rust Inhibitor M is a corrosion inhibiting additive for open or exposed steel reinforcement and other steel parts when restoring concrete. It is highly water repelling, alkali resistant, polymer dispersion modified with active rust inhibitors.

Best Uses

Rust Inhibitor M (also known as Remmers S Protect M) is an additive for the production of a durable corrosion inhibiting coating made with Betofix RM or Betofix R2. It is used for open or exposed steel reinforcement and other steel parts when restoring concrete.

Application

De-rust exposed steel reinforcement to bright metal (SA 2 ½ ). Then mix approx. 2.5 parts by weight Betofix RM with 1 part by weight Rust Inhibitor M until a homogeneous brushing consistence has been achieved. Coat the entire surface of the steel reinforcement with the freshly mixed corrosion inhibiting grout at least 1 mm thick. Apply a second coat of fresh corrosion inhibiting grout after a waiting time of at least 30 minutes. After a further 30 minutes, the broken out area can be closed with Betofix RM or Betofix R2.

Technical Details

Technical Info

Components: Single pack
Type: Rust Inhibitor
Finish: -
Stock Colours: -
Tintable: No
VOC Content: 140 g/l
Volume Solids: 47%
Suitable Substrates: Steel
Application Method: Brush
Theoretical Coverage: 3.2 Kg mixture total per 1m² 
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Clean tools with water
Shelf Life: 12 months unopened
Packaging: Available in 1 Kg and 5 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use