Remmers Selectmix SBL is a filler mixture with a special aggregate grading curve for certain Remmers epoxy resin systems.
Remmers Selectmix SBL is suitable for incorporation with Remmers Epoxy BS 3000 SG, Remmers UV 100 New and Remmers Metalufloor to provide a high degree of filling even at low layer thickness's.
For professional users only. Degree of filling and working directions are determined by the specific application and the resin / hardener system used.
The max. degree of filling depends on the binder used, the layer thickness and the conditions on the construction site. Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.
- Application Rate: Dependent on application (see Technical Data Sheet for the applicable binder)
- Shelf Life: Unlimited if stored dry
- Available in 15 Kg bags
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.