SKU: id23852
Non Hazardous

Remmers Water Stop VF Tapes

Premium sealing tapes for interior and exterior use.
Price on Application - Call our office for a quotation
* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
3. Select a Qty
As low as:
£0.00
Inc VAT £0.00
PRODUCT DETAILS

Remmers Water Stop VF Tapes are high quality sealing tapes which are based on nitrile rubber and coated with a non-woven fabric.

Best Uses

Remmers Water Stop Tape VF is suitable for both indoor and outdoor use, and can be used in the following instances:

  • Waterproofing in the transition to water impermeable concrete constructions (testing principles)
  • Plinth waterproofing
  • Waterproofing in a bund
  • Connection and integration of flexible, mineral waterproofing slurries with non-mineral building materials and connection areas such as plastic, metal and wood.

Application

The substrate should be clean, dry and capable of supporting a load.

  • The temperature of the material, air and substrate should be: from min +5°C to max +30°C
  • Apply waterproofing material as contact layer, work in Water Stop over the entire surface.
  • In corner areas, Interior Corner VF and Exterior Corner VF are placed so that they overlap the water stop.
  • In areas where pipes pass through walls, Wall Gasket VF or a shaped piece made of Water Stop VF 500 can be used.
  • Depending on the waterproofing product used, the 2nd and 3rd layer of waterproofing is applied over the entire surface.

The permissible application temperatures depend on the product properties of the waterproofing products used. Apply the waterproofing material crosswise in relation to the tape. The tape must not be damaged.

TECHNICAL

Features and Benefits

  • Highly flexible
  • High expansion capability and elastic recovery
  • Special non-woven fabric coating

Available Variants

4804 Water Stop VF 120 / 500 Pack of 5 550
4805 Water Stop VF 120 / 500 50m
5071 Tape VF 120 / Water Stop VF 120 10m x 120mm wide
5072 Tape VF 120 / Water Stop VF 120 50m x 120mm wide
5073 Tape VF EC / Exterior Corner VF Pack of 10 6000
5074 Tape VF 100 IC / Interior Corner VF Pack of 10 6000
5075 Tape VF 500 / Water Stop VF 500 10m x 500mm wide 10m

Technical Info

Colour: Blue
Water Impermeability: Approx. 3.0 bar
Sd Value: 5 m
Temperature Resistance: -20 °C to +90 °C
Thickness: 0.65 mm
Application Method:

For cutting: scissors or knife

For waterproofing: roller, wide brush or filling knife

Cleaner / Thinner: Clean tools with water while the material is still fresh
Shelf Life:

Virtually unlimited when stored dry at room temperature and protected from direct sunlight.

Packaging: See available options above.

RELATED PRODUCTS

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Jotun Tankguard DW
A 2 pack solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.
From £330.31
(£396.37 Inc VAT)
Jotun Tankguard HB Classic Formerly Tankguard HB
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
From £296.10
(£355.32 Inc VAT)
Jotun Tankguard SF
A 2 pack solvent free amine cured phenolic/novolac epoxy. Tank lining with very good chemical resistance.
From £447.76
(£537.31 Inc VAT)
Sherwin Williams Dura-Plate UHS Epoxy Tank Lining
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.
From £451.41
(£541.69 Inc VAT)
Sherwin Williams Nova-Plate UHS Epoxy Tank Lining
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.
From £526.76
(£632.11 Inc VAT)
Jotun Tankguard Storage
A two pack polyamine cured phenolic / novolac epoxy coating that is specially formulated for tank lining.
From £241.10
(£289.32 Inc VAT)
Ronacrete RonaFix Pre-Packed Tanking Render
A pre-packed tank lining mortar for hand and spray applications.
From £36.13
(£43.36 Inc VAT)
Centrecoat SF Hygienic Floor and Tank Coating
A hygienic floor coating in manufacturing and food preparation areas. An ideal chemical resistant tank liner.
From £80.15
(£96.18 Inc VAT)