Please note, this product is now out of stock. See the Owl Roof range as a potential alternative.
Res-Tec Flexitec 2020 Powder Hardener is designed to be added to Res-Tec Flexitec 2020 Primer & Resin to initiate the curing process.
Res-Tec Flexitec 2020 Primer & Resins require Powder Hardener at a minimum of 2% and a maximum of 4% depending on temperature - see application guide download on data sheets tab. To ensure that the curing process is not impeded:
- Never use less than 2% even in hot condition
- Never use more than 4% even in cold conditions
Consult the application guide for correct use of this product. It is not recommended to Catalyse more than 5kg of primer and 10kg of resin at a time to ensure sufficient working times and consistency.
- Available in 1 Kg
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.