£7.75 delivery on orders excluding certain products & postcodes *
Bradite's Fastrac Rust Converter is especially suited for objects which may be difficult to sand blast such as; fences, iron railings, guttering and outdoor fixtures.
Application and use should always conform to the codes of practice described in BS 6150 and BS 5493. Brush application is strongly recommended and is the preferred application method for best performance.
Components: | Single Pack |
Type: | Water Thinned |
Finish: | Eggshell (approx. 20%) |
Stock Colours: | White (turns black on contact with rust) |
Tintable: | No |
VOC Content: | 29 g/L |
Volume Solids: | 65% |
Suitable Substrates: | Steel mechanically prepared to SIS St 3, by wire brush and disc or hand abrading |
Application Method: | Brush, Roller, Airless Spray or Conventional Air Spraying |
Theoretical Coverage: | 20 m2/L/coat |
Wet Film Thickness (WFT): | 30 microns/coat |
Dry Film Thickness (DFT): | 20 microns/coat |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 20-30 minutes at 20°C |
Overcoatable: | After 3 hours minimum at 20°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | Water |
Shelf Life: | 12 months minimum in original unopened containers |
Packaging: | Available in 1 Litre |