This product is now discontinued. Please contact our technical team for a suitable alternative.
Rustoleum 5161 Flexible Joint Filler Primer is suitable as an aid to improve adhesion when using Rustoleum 5160 Flexible Joint Filler.
Rustoleum 5161 Flexible Joint Filler Primer is recommended as an adhesion primer for Rustoleum 5160.
Spalled joints should be repaired initially using 5180 Epoxy Repair Mortar. For best results use Flexible Joint Filler Rods to reduce deeper joints to the desired depth. Apply 5161 Primer by brush to the sides of the joint and allow to dry (± 30 minutes at 20˚C). Pour evenly Rustoleum 5160 Flexible Joint Filler into the prepared joint, leaving the top of the joint sealant just below the surface of the floor. If required, finish off with a flat blade or knife to remove air bubbles and then remove any masking tape.
- Available in 0.25 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.