Rustoleum (Anglo) Supergrip Safe-T-Epoxy is a traction enhancing epoxy resin coating for application on to smooth and potentially slippery floors.
Suitable for concrete, wooden and stone floors to provide an safe anti-slip surface. Designed to be applied using a roller, this epoxy anti-slip epoxy resin is suitable for heavy wear areas such as concrete and stone floors. Safe-T-Epoxy contains fine, traction enhancing aggregate which provides a strong coat that acts as a primer / sealer.
Usable life of the mixed components is approximately one hour at 15 to 20°C. Can be applied using either a roller or brush. If applying on to concrete floors ensure floor is completely clean and dry. It is not recommended to apply on to smooth/dense concrete or concrete containing a curing compound which will prevent good adhesion. The product must be stored for a minimum of 8 hours prior to use at a temperature range of between 15°C to 25°C
- Matt to low sheen finish
- Coverage: Approx 30m2 per 5 Litres for one coat
- Rollers should be cleaned with warm soapy water before the product has cured.
- Care should be made that no partly cured material is not kept on the roller during application
- Do not allow product to freeze.
- Curing Time: To handle - overnight, 7 days to full hardiness
- Available in 5 Litre tins in various colours
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.