*Rustoleum Trade Aqua Satin

SKU id21739 ***
This product is now discontinued.

Product Description

Please note, this product has now been discontinued.

Rustoleum Aqua Satin is a water based acrylic gloss topcoat that provides a durable, scratch resistant finish with excellent hiding power. For interior use only.

Best Uses

Rustoleum Aqua Satin is an acrylic-based, scratch-resistant, durable, colour-fast satin gloss top coat with excellent hiding power. For interior use. Can be applied to wood, board, primed metal, plastics and plasterwork.

  • Quick drying
  • Contains a low concentration of solvents
  • Virtually odour-free
  • Scratch-resistant
  • Excellent hiding capacity
  • For internal use

Application

Surfaces must be clean, dry and free from dustor grease.

For untreated wood: Degrease, sand lightly and remove any dust. Next, apply Rustoleum Acrylic Primer. Allow to dry. Next sand the surface, remove dust and fill any irregularities if present. Apply primer to filled areas. Finish with 1 or 2 coats of Acrylic Lacquer Silk.

For painted surfaces in good condition: Carefully degrease with a degreasing agent, sand down until matt and remove dust. If necessary, fill irregularities with filler and apply Acrylic Primer to the filler when dry. Sand to a smooth finish. Finally, apply 1 top coat of Acrylic Lacquer Silk.

For painted surfaces in poor condition: Remove all poorly adhering paint using paint stripper or a blowtorch/hot air paint removal gun. Then treat as “Untreated wood”.

For untreated MDF, chipboard, etc.: Degrease, sand lightly and remove any dust. Apply Acrylic Primer after diluting with 5 - 10% water. Allow to dry, sand and remove dust. Next, apply a second undiluted coat of Acrylic Primer. Finish with 1 or 2 coats of Acrylic Lacquer Silk.

For untreated metal: Carefully remove grease, any mill scale and rust. Pre-treat with a suitable rust preventive primer. Next, apply an undiluted coat of Acrylic Primer. Finally, apply 1 top coat of Acrylic Lacquer Silk.

For hard plastics: Degrease, lightly sand and remove any dust. Pre-treat with 1 coat of Universal Primer and finish by applying a top coat of Acrylic Lacquer Silk.

Stir thoroughly prior to use. Apply 1 or 2 coats using an acrylic paint brush, acrylic paint roller or paint sprayer. The first layer can be diluted with up to 3% of water. After every coat, lightly sand down and remove dust.

Recommended Products To Use


*Rustoleum Trade Aqua Matt

*Rustoleum Trade Aqua Matt

This product is now discontinued.

£27.90 (£33.48 Inc VAT)
*Rustoleum Trade Aqua Gloss

*Rustoleum Trade Aqua Gloss

This product is now discontinued.

£31.32 (£37.58 Inc VAT)