*Rustoleum Trade Contract Masonry Matt

SKU
id21676
***
This product is now discontinued.
Out of stock
Product Description

Please note this product has been discontinued.

Rustoleum Contract Masonry Matt is a solvent free wall paint based on a synthetic resin dispersion. Ideal for painting walls and ceilings in large-scale new construction and renovation projects.

Best Uses

Rustoleum Contract Masonry Matt is a solvent free wall paint based on a synthetic resin dispersion, specifically designed for painting walls and ceilings in large-scale new construction and renovation projects. Can be applied universally in dry and wet rooms. For interior and exterior use.

Rustoleum Contract Masonry Matt is ideal for project-based use. Suitable surfaces include: existing coats of wall paint, cement and plasterwork, concrete, brick, etc.

Suitable for interior and exterior use.

  • Large-scale project quality
  • High financial return
  • Easy to apply
  • Good hiding power
  • Easy to clean

Application

The surface must be capable of supporting the paint, completely set, clean, dry, and free from dust or grease. Sand and repair surface irregularities. Remove and/or repair all loose and unstable coats. In the case of exterior applications, remove all moss, mould and algal growth.

For new, untreated substrates

  • Prime (highly) absorbent surfaces in their entirety using Stabilising primer.
  • Thoroughly clean powdery surfaces. Prime using Stabilising primer after allowing to dry.
  • Apply the top coat after allowing to dry.

For existing intact coats of wall paint

  • Clean using Paint cleaner.
  • Apply an intermediate coat of Wall primer opaque if necessary.
  • Apply the top coat after allowing to dry.

For existing, flaking coats of wall paint

  • Remove loose parts.
  • Thoroughly wash powdery coats and allow them to dry.
  • Carry out any repairs.
  • Prime with Stabilising primer.
  • Apply the top coat after allowing to dry.

For substrates with stains caused by nicotine, damp, rust or soot

  • Clean thoroughly using Paint cleaner.
  • Treat surface/stain with Sealing primer.
  • Apply the top coat after allowing to dry.

The systems described above apply for the most common types of surface. For specific applicationsand/or detailed advice, please contact our technical team.

Stir thoroughly prior to use. The first coat can be diluted with a maximum of 10% water. Apply in 1 or 2 coats using a suitable brush, paint roller or paint sprayer. Always work wet-on-wet to prevent visible marks in the paint. Back-roll all overlaps in the same direction. Do not touch up when drying.

Technical Details
Components: Single Pack
Type: Water Based
Finish: Matt
Stock Colours: White and Magnolia
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 5 g/L
Volume Solids: 37%
Suitable Substrates: Suitable surfaces include: existing coats of wall paint, cement and plasterwork, concrete, brick, etc. Internally and externally
Application Method: Brush, Roller or Spray
Theoretical Coverage: 7 m2 per litre per coat
Wet Film Thickness (WFT): 150 microns
Dry Film Thickness (DFT): 65 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: After 6 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: Minimum of 12 months in the tightly sealed original packaging in a dry, cool and frost-free place.
Packaging: Available in 10 Litres