*Rustoleum Trade Contract Matt

SKU id21625 ***
This product is now discontinued.

Product Description

Please note this product has been discontinued.

Rustoleum Contract Matt is a economical matt, solvent free wall paint suitable for large scale contractor projects. Available in White and Magnolia.

Best Uses

Rustoleum Contract Matt is a matt, solvent-free wall paint based on a synthetic resin dispersion, specifically designed for painting walls and ceilings in large-scale new construction and renovation projects. For application in dry areas. For interior use.

Rustoleum Contract Matt is formulated as a wall paint on mineral substrates for renovation and new-construction projects. Suitable surfaces include: existing coats of wall paint, cement and plasterwork, concrete, brick, gypsum panelling, board, etc. Also suitable for painting glass fibre fabric.

  • Large-scale project quality
  • Easy to apply
  • High financial return
  • Good coverage and easy to clean

Application

The substrate must be capable of supporting the paint, completely set, clean, dry, and free from dust or grease. Sand and repair surface irregularities. Remove and/or repair all loose and unstable coats.

For new, untreated substrates

  • Prime (highly) absorbent surfaces in their entirety using Stabilising Primer
  • Thoroughly clean powdery surfaces. Prime using Stabilising primer after allowing to dry.
  • Apply the top coat after allowing to dry.

For existing intact coats of wall paint

  • Clean using Paint cleaner.
  • Apply an intermediate coat of Wall Primer Opaque if required.
  • Apply the top coat after allowing to dry.

For existing, flaking coats of wall paint

  • Remove loose parts.
  • Thoroughly wash powdery coats and allow them to dry.
  • Carry out any repairs.
  • Prime with Stabilising primer.
  • Cover with paint after allowing to dry.

For contamination caused by nicotine, damp, rust or soot

  • Clean thoroughly using Paint cleaner.
  • Treat surface/stain with Sealing primer.
  • Apply the top coat after allowing to dry.

The systems described above apply for the most common types of surface. For specific applications and/or detailed advice, please contact our technical team.

Stir thoroughly prior to use. The first coat can be diluted with a maximum of 10% water. Apply in 1 or 2 coats using a suitable brush, paint roller or paint sprayer. Always work wet-on-wet to prevent visible marks in the paint. Retouch all lengths in the same direction. Do not touch up when drying.

Do not apply at temperatures below +8°C. Only apply if the surface temperature is at least 3°C above the dew point temperature.

Recommended Products To Use


*Rustoleum Trade Contract Primer

*Rustoleum Trade Contract Primer

This product is now discontinued.

£32.36 (£38.83 Inc VAT)
*Rustoleum Trade Contract Masonry Matt

*Rustoleum Trade Contract Masonry Matt

This product is now discontinued.

£43.85 (£52.62 Inc VAT)