Rustoleum Graffiti Shield Polycoat

Non Hazardous
A single pack polyurethane anti-graffiti coating for indoor and outdoor use.
Available in 2.5 Litres
From £102.70 £85.58
In stock
Only %1 left
Product Description

Rustoleum Graffiti Shield Polycoat is a single pack polyurethane anti-graffiti coating for indoor and outdoor use.

Best Uses

Rustoleum GraffitiShield Polycoat is formulated as a durable substrate protector which is suitable for both indoors and out, and for non-absorbent and/or solvent-sensitive surfaces. Polycoat is ideal for façade insulation systems, layers of plaster or concrete, but also surfaces which have been treated with acrylic dispersion

Please note, this product is not suitable for use on very porous and/or very textured surfaces. Apply in 1 thin coat (not more than 100μm).


Before use, stir well to ensure a good degree of homogeneity. Apply in 1 thin coat (not more than 100μm). Apply via brush or roller.

Technical Details
Components: Single Pack
Type: Polyurethane
Finish: Matt
Stock Colours:
Tintable: No
VOC Content: 10 g/L
Volume Solids: 99%
Suitable Substrates: Plaster Work, Concrete and Previous Painted Surfaces
Application Method: Brush, Roller
Theoretical Coverage: 10 m2 per litre
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 99 microns
Induction Time: -
Pot Life: 30 minutes at 20°C
Touch Dry: 1 hour at 20°C
Overcoatable: After 12 hours at 20°C
Fully Cured: 3 days at 20°C
Cleaner / Thinner: Rustoleum Thinner 160
Shelf Life: 1 year from production date, provided it is stored in the unopened original packaging, in a dry, well-ventilated space, away from direct sunlight, at a temperature between 0° and 30°C.
Packaging: Available in 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use