Rustoleum Graffiti Shield Wax

SKU
id3812
Non Hazardous
An anti-graffiti product designed for use on masonry walls and all kinds of brickwork, that works to protect the substrate against vandalism.
Available in 10 Litres
£211.84 £176.53
In stock
Product Description

Rustoleum Graffiti Shield Wax is an anti-graffiti product designed for use on masonry walls and all kinds of brickwork, that works to protect the substrate against vandalism via graffiti and the damages and inconvenience that it causes.

Best Uses

Rustoleum Graffiti Shield Wax is best used on untreated mineral surfaces and in areas prone to graffiti abuse. Walls, Ceilings and Exterior Floors can all be coated using this Anti-Graffiti Wax that offers excellent protective properties against UV light and Water.

Application

Rustoleum Graffiti Shield Wax can be applied using airless spray of Graffiti Shield Spray Pump offering a theoretical coverage rate of 6.7m2 per litre. Rustoleum Graffiti Shield Wax comes in 10 litre containers providing users with an overall coverage rate of approximately 60-70m2.

Use Rustoleum Graffiti Shield Cleaner to remove Graffiti from the surface once the wax has been applied or by using a Hot Pressure Washer.

Surface and Environment

Rustoleum Graffiti Shield Wax can be used on all mineral substrates like bricks, masonry, limestone, marble and natural stone, externally. Rustoleum Graffiti Shield Wax gets to work straight away protecting your surface against graffiti.

Technical Details

Features

  • Graffiti Shield Wax is ideal for untreated mineral substrates like bricks, masonry, limestone, natural stone, marble, etc
  • Sacrificial anti-graffiti layer based on natural wax
  • Suitable for a single cleaning process
  • Virtually invisible.
  • UV-resistant
  • Biodegradable
  • Low on solvents
  • Water vapour permeable
  • Immediately graffiti proof

Technical Info

Components: Single Pack
Type: Wax
Finish: Satin
Stock Colours: Clear
Tintable: No
VOC Content: 25 g/L
Volume Solids:
Suitable Substrates: Many substrates
Application Method: Air-Atomised Spray or Airless Spray
Theoretical Coverage: 6.7 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: 2 hours at 20°C
Fully Cured: 24 hours at 20°C
Cleaner / Thinner: Water
Shelf Life: 1 year from production date, provided it is stored in the unopened original packaging, in a dry, well-ventilated space, away from direct sunlight, at a temperature between 0° and 30°C.
Packaging: Available in 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use