Rustoleum Hard Hat 2100 Topcoat

SKU
id1050
UN1950 (Class: 2)
Fast drying aerosol paint suitable for small maintenance or touch up jobs onto bare metal, wood and concrete.
Available in Packs of 6x 500ml Aerosols or 9x400ml for special tints (please note these can take up to 5 working days)
From £60.00 £50.00
In stock
Only %1 left
Product Description

Rustoleum Hard Hat 2100 Aerosol can be used on bare metal, wood and concrete, and is ideal for small maintenance or touch up jobs for a multitude of projects.

Rustoleum Hard Hat Top Coat Aerosol Spray 2100 has been specifically designed for small maintenance or touch up jobs. Hard Hat Top Coat 2100 is a fast drying short oil soya alkyd based on lead and chromate free pigment. These pigments offer longer gloss and colour retention and help to create extra resistance to chipping and cracking. Hard Hat Top Coat has heat resistance for up to 100°C, although discolouration may occur above 65°C. Rustoleum Hard Hat Aerosol offers you a quick drying time of 10-15 minutes without drips or runs.

Best Uses

Rustoleum Topcoats 2100 should be used in normal humidity, interior applications and industrial exposures. Hard Hat aerosols have more in them than the standard aerosol and can and last 2-3 times longer. This means this product will go further, resulting in higher coverage rates. As well as having a longer lasting life than the average aerosol, Rustoleum Hard Hat topcoat Aerosol 2100 also offers you twice the opacity of cheaper spray cans meaning no cross layer will be required as normal coverage can be achieved in one layer.

Application

Remove the cover cap and shake vigorously for at least one minute after the rattle of the mixing ball is heard. Hold the can approximately 25cm from the surface using a back and forth motion whilst keeping the can parallel with the surface. Make sure you shake the can frequently during use. Ensure that the can is always in motion when you are holding the spray button in to avoid runs, sags and leaks occurring.

Surface/Environment

Rustoleum Topcoat Aerosols should be applied over Hard Hat Primers or properly prepared painted substrates. Rustoleum Hardhat 2100 Aerosol can be used on bare metal, wood and concrete, and is ideal for small maintenance or touch up jobs.

Technical Details

Features

  • Rustoleum Hard Hat Aerosol Topcoats 2100 is a fast-drying short oil soya alkyd based on lead and cromate free pigment
  • Ideal for small maintenance or touch up jobs
  • Heat resistant up to 100°C (dry heat), above 65°C discoloration may occur
  • Only available in boxes of 6 tins (9 tins if ordering a special colour)
  • Bright topcoats may need a light coloured primer/intermediate coat.

Technical Info

Components: One Part
Type: Fast drying short oil soya alkyd aerosol
Finish: Gloss, Satin and Matt
Stock Colours: Various See Above
Tintable: Yes. 400ml aerosols and minimum order quantity is 9 tins, please call for info. Please note, bespoke tints are non refundable / exchangable.
VOC Content: 640.0g - 650.0g per Litre
Volume Solids: -
Suitable Substrates: Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates
Application Method: Aerosol
Theoretical Coverage: 2.5 m2 per spray can at 25 microns dry
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 25 microns
Induction Time: -
Pot Life: -
Touch Dry: 15 minutes at 20°C
Overcoatable: Within 1 hour or after 48 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: -
Shelf Life: 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
Packaging: Available in Packs of 6x 500ml Aerosols or 9x400ml for special tints (please note these can take up to 5 working days)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use