Rustoleum Plasti-Parket is a suitable solvent based varnish for the treatment and protection of parquet floors and wooden staircases.
For new parquet floors or parquet floors, rub down until bare wood: de-dust thoroughly, impregnate with Rustoleum Adex and let dry for minimal one night. After this, rub down lightly. Replace Rustoleum Adex by diluted Duritane Gloss if the wood is coloured too strong. Old parquet floors already treated with wax: first remove the wax layer thoroughly (scrape). Use cleaning cloths soaked with white spirit. After this, apply one coat Rustoleum Adex. The Rustoleum Adex layer should be completely dry the next day. If this is not the case, it is an indication that the old wax layer was not removed enough. Clean the floor again as described above. Remark: use sufficient cleaning cloths to remove the wax layer in order to avoid that the removed wax is applied on other parts of the floor.
Apply using brush or roller. If necessary dilute up to 5% with Rustoleum Thinners 22. Apply minimal 2 coats of Plasti-Parket.
|Type:||Solvent-based varnish based on a modified polyurethane alkyd binder|
|Finish:||Satin / Semi Gloss|
|VOC Content:||445.0g per Litre|
|Volume Solids:||43 - 45%|
|Suitable Substrates:||For the treatment and protection of parquet floors and wooden staircases|
|Application Method:||Brush, Fine Roller|
|Theoretical Coverage:||10 m2 per litre|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||40 microns|
|Touch Dry:||1.5 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||White Spirit or Rustoleum Thinner 22|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C|
|Packaging:||Available in 2.5 Litres|