Rustoleum 8399 Mould Resistant Hygienic Primer

SKU id3752 UN1263 (Class: 3, Pk Grp: III)
A fast drying, mould resistant primer designed for providing a protective undercoat to a variety of different surfaces, specifically walls and ceilings in a light industrial environment.
Available in 5 and 20 Litres
£71.95 (£86.34 Inc VAT)
£71.95 (£86.34 Inc VAT)

Product Description

Rustoleum Mould Resistant Hygiene Primer 8399 is a fast drying, mould resistant primer designed for providing a protective undercoat to walls and ceilings. Recoatable with Rust-Oleum 8300.

Best Uses

Rustoleum Mould Resistant Hygiene Primer 8399 is a single pack hygienic primer that will protect, when overcoated with Rust-Oleum 8300, against mild chemical exposure, occasional product spillage, frequent chemical cleaning, humidity and moisture. Suitable for application onto internal walls and ceilings.

Rustoleum Mould Resistant Hygiene Primer 8399 should be used on mineral substrates like concrete, brick and plastered walls, masonry and mineral fibre board. Rustoleum Mould Resistant Hygiene Primer 8399 should always be recoated with Rustoleum 8300 Topcoat. When applied together they resist mild chemical exposure, occasional product spillage, frequent chemical cleaning, intermittent high humidity and moisture.

  • Very fast drying and recoatable with 8300 hygienic topcoat
  • Offers protection against mild chemical exposure, occasional product spillage, frequent chemical cleaning, intermittent high humidity and moisture
  • Can be applied as low as -10 °C ; ideal for refrigerated areas
  • Non-yellowing and resistant to frequent cleaning
  • Classified Class 1 Surface Spread of Flame according to BS 476; part 7 : 1987

Application

New concrete, plastered or brick surfaces should cure and dry for at least 30 days prior to the application of coatings. Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning. (With Rustoleum ND14 or Rustoleum FK111) Wash total surface with plenty of fresh/warm water or high pressure (steam) cleaning in order to remove all remnants of contamination and cleaners. Sand previous coatings, which are in good condition to remove gloss and to roughen the surface slightly. Remove non-adhering old coatings. The surface must be clean and dry during application.

To ensure homogeneity, coating materials should be thoroughly stirred prior to use. Apply by brush, roller, airless or air assisted spray.

Surface and Environment

Rustoleum Mould Resistant Hygiene Primer 8399 should be used on mineral substrates like concrete, brick, plastered walls, masonry and mineral fibre board. Rustoleum Mould Resistant Hygiene Primer 8399 works well to resist against mild chemical exposure, occasional product spillages, frequent chemical cleaning, high humidity and moisture.

Recommended Products To Use


Rustoleum ND14 Cleaner and Degreaser, 5 Litres

Rustoleum ND14 Cleaner and Degreaser, 5 Litres

Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be us...

£65.39 (£78.47 Inc VAT)
Rustoleum 8300 Hygienic Wall Coating Cold-Store Paint

Rustoleum 8300 Hygienic Wall Coating Cold-Store Paint

Designed for Walls and Ceilings and should ideally be applied over 8399 masonry sealer.

£77.00 (£92.40 Inc VAT)
Rustoleum FK111 Fungicidal Cleaner Degreaser, 5 Litres

Rustoleum FK111 Fungicidal Cleaner Degreaser, 5 Litres

Rustoleum FK111 fungicidal cleaning solution kills mould, mildew bacteria, removes oil grease and proteins.

£36.95 (£44.34 Inc VAT)