Rustoleum Mathys Paracem Deco Soft

SKU
id21183
Non Hazardous
A water borne acrylic high quality, semi matt interior washable wall paint.
Available in 4 and 10 Litres. Tintable to a huge range of colours.
From £42.40 £35.33
In stock
Only %1 left
Product Description

Rustoleum Paracem Deco Soft is a water borne acrylic high quality, semi matt interior washable wall paint.

Best Uses

Paracem Deco Soft is a waterborne acrylic paint for interior application. Rustoleum Paracem Deco Soft is a decorative and satin matt finishing for indoor walls and ceilings. Applicable on most substrates (plaster, bricks, concrete, etc.) as well on glass fibre.

  • Excellent flow
  • Good mechanical resistance against rubbing
  • Smooth semi- matt aspect
  • Closed coating structure, washable
  • High covering power

Application

Old cleaned layers in good condition and light porous substrates may be recoated directly with Paracem Deco Soft. Very porous substrates, smooth plaster and water-resistant plasterboard are to be impregnated first with Rustoleum Pegafix. Nicotine stains must be isolated first with Rustoleum Pegaprim Isofix, Rustoleum Pegamat Aqua or Rustoleum Pegamat RL.

Old damp spots must be isolated with Rustoleum Pegamat RL or Rustoleum Pegaprim Isofix. Unpainted woodwork must be treated appropriately first and a priming coat must be applied (e.g. Rustoleum Fassiprim or Rustoleum Pegaprim Xpress). Metal objects without rust spots are to be pre-treated with Rustoleum Pegalink, Rustoleum Pegaprim Xpress or Rustoleum Galvaprim.

Technical Details
Components: Single Pack
Type: Water Borne Acrylic
Finish: Semi Matt
Stock Colours: Just tints
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 14 g/L
Volume Solids: 38 - 40%
Suitable Substrates: Applicable on most substrates (plaster, bricks, concrete, etc.)
Application Method: Brush, Roller, Air Spray or Airless Spray
Theoretical Coverage: 7 - 9 m2 per litre per coat
Wet Film Thickness (WFT): 140 microns
Dry Film Thickness (DFT): 55 microns
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: After 2 hours minimum at 20°C
Fully Cured: 2 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 4 and 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use