Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Rustoleum Paracem Quartz is a dispersion paint for internal and external use with a fine quartz finish.
Rustoleum Paracem Quartz is ideal for the protection of old deteriorated or cracked walls. It is also ideal for the protection of concrete cell blocks against weather influences.
- Perfect saponification resistance
- Fine quartz finish
- Excellent weather resistance
For Walls in poor condition: Remove all old coatings or bad plasterwork. Sand/treat the wall with a wire brush to remove all loose particles. Repair all damaged parts with a cement mortar or Mathys Pegacrete. Small repairs can be treated with a mix of Paracem Quartz filled with dry sharp sand. All repairs should be primed with Mathys Pegafix. Fill up holes and seal joints or fissures with Mathys Elastofill.
New walls/masonry: If possible wait 1 year before treatment. The substrate must be sufficiently dry and stable and no bleeding of nitric acid should be visible.
Brush dry and dust, then apply a coat of Mathys Pegafix or Rustoleum Primer 44HS.
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
|Stock Colours:||1 White|
|Tintable:||Yes, if you order over 500 Kg. Please note, bespoke tints are non refundable / exchangeable.|
|VOC Content:||30 g/L|
|Volume Solids:||55 - 59%|
|Suitable Substrates:||For protection of old deteriorated or cracked walls or the protection of concrete cell blocks against weather influences|
|Application Method:||Brush, Roller, Air Spray or Airless Spray|
|Theoretical Coverage:||500 g per m2 on even flat substrates. Minimum 1 Kg per m2 on structured substrates such as concrete cell blocks|
|Wet Film Thickness (WFT):||300 microns|
|Dry Film Thickness (DFT):||175 microns|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 8 hours at 20°C|
|Fully Cured:||1 day at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Packaging:||Available in 5 and 15 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.