Rustoleum Pegasol Quartz Anti-Slip Floor Paint can be used on a variety of different surfaces, including concrete, tarmacadam, tiles, ceramics and non porous natural stones.
Rustoleum Pegasol Quartz Anti-Slip Floor Paint is a 2 part water based floor paint for use on terraces and balconies and provides an excellent balcony coating with a decorative quartz structured finish. Not only does Rustoleum Pegasol Quartz Anti-Slip Floor Paint offer a decorative finish but it offers outstanding resistance to weathering, abrasion and mechanical use.
Rustoleum Pegasol Quartz Anti-Slip Floor Paint is best used on balcony and terrace floors but can also be used internally in places like workshops, warehouses and industrial floors, or in garages. When using on garage floors a top coat of Rustoleum Pegakote should be used to work effectively.
The substrate should be clean, dry and free from rising ground water. Pegasol Quartz can be applied directly on tiles, ceramics (even glazed), non-porous natural stones, tarmacadam. Porous concrete must be impregnated first with Rustoleum Primer 44 HS or with Rustoleum Vernac diluted with 10% volume Rustoleum Thinner 22. Curing compounds in case of poly concrete have to be removed by sand or grit blasting. On new or non-porous concrete, remove the cement grout by sand or grit blasting or attack with diluted hydrochloric acid (3 l hydrochloric acid in 10 l water, let it act for 10 minutes and rinse abundantly with clear water), let it dry a few days before application.
To ensure homogeneity, coating materials should be thoroughly stirred prior to use. Apply via brush, roller or airless spray.
- For interior and exterior use.
- Features a durable Quartz finish and is water vapour permeable.
- Easy to apply, fast drying floor coating.
- No odour, high abrasion resistance, high mechanical resistance.
- Excellent adhesion on most substrates.
- Resistant to hydrochloric acid, sulphurous acid, acetic acid as well as caustic soda.
- Resistant to solvents such as trichloroethylene, methylene chloride and xylenes.
- Porous concrete must be impregnated first with Primer 44 diluted with 30% Thinner 22.
|Type:||Durable anti-slip coating|
|Stock Colours:||Dark Grey 185.3BN.7 (available in a range of other colours)|
|VOC Content:||30 g/l|
|Suitable Substrates:||Pourous Concrete, Tiles, Ceramics,Non-Porous Natural Stones|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||800 g/m2 in one coat. (9.30 m2 per tin)|
|Wet Film Thickness (WFT):||500 μm (800 g/m²)|
|Dry Film Thickness (DFT):||315 μm|
|Pot Life:||1 hour (12 hours when diluted with 5% volume water)|
|Touch Dry:||45 minutes at 20°C|
|Overcoatable:||After 6 hours at 20°C|
|Fully Cured:||1 week at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 22|
|Shelf Life:||2 years unopened|
|Packaging:||Available in 7.5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.