Please note, this product is now discontinued.
Rustoleum Premium Cover Masonry Matt is a high quality, 100% acrylic masonry paint that benefits from good water vapour permeability and excellent scrub resistance.
Rustoleum Premium Cover Masonry Matt is a very high quality, matt, 100% acrylic wall paint. Good weather resistance, good water vapour permeability and excellent scrub-resistance. Provides excellent coverage and optimum flow for an attractive, smooth finish. Designed for a long-lasting finish on exterior walls and interior walls in damp rooms. For interior and exterior use.
Rustoleum Premium Cover Masonry Matt is mainly intended for exterior work that needs to meet high standards due to its superior quality. Suitable surfaces are, for example: existing coats of wall paint, cement and plasterwork, concrete, brick, etc.
- Optimum flow
- Scrub-resistant, class 1 (DIN EN 13300)
- 100% acrylic
- Excellent coverage
- Highly weather-resistant
The surface must have a load-bearing capacity and must be fully set, dry and free from dust or grease. Sand and repair surface irregularities. Remove and/or repair all loose and unstable coats. When using externally, remove all algae and moss.
For new, untreated substrates
- Prime highly absorbent surfaces in their entirety using SPS Stabilising primer. Thoroughly clean powdery surfaces. Prime with Stabilising primer after allowing to dry. Paint to cover after allowing to dry.
For existing intact coats of wall paint
- Clean using SPS Paint cleaner. Apply an intermediate coat of SPS Wall Primer Opaque if required. Paint to cover after allowing to dry.
For existing, non-load-bearing coats of wall paint
- Remove loose parts. Thoroughly wash powdery coats and allow to dry. Carry out any repairs. Prime with SPS Stabilising primer. Paint to cover after allowing to dry.
For substrates with contamination caused by nicotine, damp, rust or soot
- Clean thoroughly using SPS Paint cleaner. Treat surface/contamination using SPS Sealing primer. Paint to cover after allowing to dry.
The aforementioned systems form a general description of the most common surfaces. Please contact our technical team for specific applications and/or detailed advice.
Do not use at temperatures below +8°C. Only use when the surface temperature is at least 3°C above the dew point temperature.
|Type:||Water Based Acrylic|
|VOC Content:||5 g/L|
|Suitable Substrates:||For external masonry such as existing coats of wall paint, cement and plasterwork, concrete, brick, etc|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||9 m2 per litre per coat|
|Wet Film Thickness (WFT):||110 microns|
|Dry Film Thickness (DFT):||46 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 6 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||Minimum of 12 months in the tightly sealed original packaging in a dry, cool and frost-free place.|
|Packaging:||Available in 4 and 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.