*Rustoleum Trade Premium Cover Soft

SKU id21631 ***
This product is now discontinued.

Product Description

Please note, this product is now discontinued.

Rustoleum Premium Cover Soft is a high quality, excellent covering 100% acrylic wall paint with a silk matt finish. Intended for a durable, decorative finish of walls and ceilings.

Best Uses

Rustoleum Premium Cover Soft is intended as a durable, decorative finish to walls, ceilings, façades and damp spaces. Due to its superior quality, it is extremely suitable for outdoor work where high demands are placed on it. Suitable substrates are for example: existing wall paint layers, cement and plaster, concrete, brick, etc.

Also suitable for damp rooms and exterior walls. Scrub-resistant (Class 1). For inside and outside.

Application

The surface must have a load-bearing capacity and must be fully set, dry and free from dust or grease. Sand and repair surface irregularities. Remove and/or repair all loose and unstable coats. When using externally, remove all algae and moss.

For new, untreated substrates

  • Prime highly absorbent surfaces in their entirety using Stabilising primer.
  • Thoroughly clean powdery surfaces. Prime with Stabilising primer after allowing to dry.
  • Paint to cover after allowing to dry.

For existing intact coats of wall paint

  • Clean using Paint cleaner.
  • Apply an intermediate coat of Wall Primer Opaque if required.
  • Paint to cover after allowing to dry.

For existing, non-load-bearing coats of wall paint

  • Remove loose parts.
  • Thoroughly wash powdery coats and allow to dry.
  • Carry out any repairs.
  • Prime with Stabilising primer.
  • Paint to cover after allowing to dry.

For substrates contaminated by nicotine, damp, rust or soot

  • Clean thoroughly.
  • Treat surface/contamination using Sealing primer.
  • Paint to cover after allowing to dry.

The aforementioned systems form a general description of the most common surfaces. Please contact our technical team for specific applications and/or detailed advice.

Stir thoroughly prior to use. The first coat can be diluted with a maximum of 10% water. Apply in 1 or 2 coats using a suitable brush, paint roller or paint sprayer. Always work wet-on-wet to prevent visible brush strokes. Retouch all lengths in the same direction. Do not retouch when drying. Do not use at temperatures below +8°C. Only use when the surface temperature is at least 3°C above the dew point temperature.

Recommended Products To Use


*Rustoleum Trade Premium Cover Masonry Matt

*Rustoleum Trade Premium Cover Masonry Matt

This product is now discontinued.

£22.97 (£27.56 Inc VAT)
*Rustoleum Trade Premium Cover Masonry Satin

*Rustoleum Trade Premium Cover Masonry Satin

This product is now discontinued.

£32.36 (£38.83 Inc VAT)
*Rustoleum Trade Premium Cover Primer

*Rustoleum Trade Premium Cover Primer

This product is now discontinued.

£16.18 (£19.42 Inc VAT)
*Rustoleum Trade Premium Cover Emulsion

*Rustoleum Trade Premium Cover Emulsion

This product is now discontinued.

£24.01 (£28.81 Inc VAT)