Rustoleum Metal Cladding PVDF Primer

SKU id10071 UN1263 (Class: 3, Pk Grp: III)
A solvent based super adhesion primer for use on PVDF and PDVF2 metal profile cladding.
Available in 5 Litres in Grey
£45.36 (£54.43 Inc VAT)
£45.36 (£54.43 Inc VAT)

Product Description

Rustoleum Metal Cladding PVDF Primer is a solvent based super adhesion primer for use on PVDF and PDVF2 metal profile cladding.

Best Uses

Rustoleum PVDF Primer has been specially developed as an adhesion primer for use on PVDF and PDVF2 metal profile cladding. PVDF Primer is also ideal for application to new un-weathered galvanised steel, zinc or aluminium sheeting. As part of the Rustoleum 10 year warranty system it is recommended that the PDVF primer is applied before the first coat of Noxyde.

This single pack solvent based super adhesion primer has been formulated from modified vinyl resins that offer exceptional hydrophobic qualities (Cori test report ref. N/8384) as well as offering outstanding performance as an adhesion promoting primer to smooth and difficult to coat metal substrates.

Application

After removing any grease, oil or other contaminates from the surface with Rustoleum ND14 and either a pressure washer or steam cleaner. PVDF primer can be applied by air-atomised spray, brush or roller. When painting either zinc or corroded aluminium it will need to be treated with Rustoleum Surfa-Etch 108. When applying PVDF primer to smooth surfaces the theoretical coverage rate is 10m2 per litre. The coverage rate will very depending upon the porosity and texture of the surface. Touch dry after 30 minutes at 20 degrees C.

Recommended Products To Use


Rustoleum Noxyde Anti Rust Cladding and Steel Paint

Rustoleum Noxyde Anti Rust Cladding and Steel Paint

Rustoleum Mathys Noxyde is a universal heavy duty, direct to metal, waterborne, elastomeric, rust preventative paint.

£41.03 (£49.24 Inc VAT)
Rustoleum Thinner 22

Rustoleum Thinner 22

Thinner for Rustoleum Primer 44 HS, Fassiclor, Galvaprim and Vernac Acrylic Varnish.

£6.73 (£8.08 Inc VAT)
Rustoleum Surfa-Etch 108 Acid Etching Solution, 5 Litres

Rustoleum Surfa-Etch 108 Acid Etching Solution, 5 Litres

Helps to provide good adhesion properties to smooth, dense power floated floors as well as galvanised steel and aluminium.

£39.95 (£47.94 Inc VAT)