Please note this product has a 2 working day leadtime to delivery.
Rustoleum Satin is a contractor satin opaque top coat for use on wood, hard plastics and metal. For interior and exterior use.
Rustoleum Satin is an ideal satin topcoat for use on wood, hard plastics and metal. For interior and exterior use. Formulated as a general trade performance finish.
Surfaces must be clean, dry and free from dust or grease.
For untreated internal wood: Degrease, sand lightly and remove any dust. Next, apply Primer. Allow to dry. Next sand the surface, remove dust and fill any irregularities if present. Apply primer to filled areas.
For untreated external wood: Degrease, sand lightly and remove any dust. Next, apply Primer. After it is dry,sand, make free of dust and fill irregularities if required. Next, apply a second undiluted coat of Primer.
For painted surfaces in good condition: Carefully degrease with a degreasing agent, sand down lightly and remove dust. If necessary, fill irregularities with filler and apply Primer. Sand to a smooth finish. Painted surfaces in poor condition: Remove all poorly adhering paint using paint stripper or a blowtorch/hot air paint removal gun. Then treat as “Unprimed wood”.
For untreated MDF, chipboard, etc.: Degrease, sand lightly and remove any dust. Next, apply Primer. Allow to dry. Next sand the surface, remove dust and fill any irregularities if present. Next, apply a second coat of Primer.
For untreated metal: Carefully remove grease, any mill scale and rust. Pre-treat with a suitable rust preventive primer. Next, apply a coat of Primer.
For hard plastics: Degrease, lightly sand and remove any dust. Prime with 1 layer of Rustoleum 6050 Multi Primer
For plasterwork: Surfaces must be completely dry and free from dust or grease. Next, apply 1 coat of Primer.
Stir thoroughly prior to use. Apply with a brush, varnish roller or paint sprayer. Indoors: 1 or 2 thin coats; outdoors: always apply 2 thin coats. After every coat, lightly sand down and remove dust.
|Stock Colours:||White, Black, RAL 9001|
|VOC Content:||300 g/L|
|Volume Solids:||65 - 79%|
|Suitable Substrates:||For internal and external wood, hard plastics and metal|
|Application Method:||Brush, Varnish Roller or Spray|
|Theoretical Coverage:||14 - 16 m2 per litre per coat|
|Wet Film Thickness (WFT):||70 microns|
|Dry Film Thickness (DFT):||45 microns|
|Touch Dry:||3 hours at 20°C|
|Overcoatable:||After 20 hours at 20°C|
|Cleaner / Thinner:||White Spirit|
|Shelf Life:||Minimum of 12 months in the tightly sealed original packaging in a dry, cool and frost-free place.|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.