Due to the closure of 3M Northallerton, this product is now discontinued. Please contact our technical team for a suitable alternative on 01462 421333.
3M Scotchkote Thinners SA65 is part of the fantastic range of thinners and cleaners brought to you by 3M Scotchkote.
Scotchkote Thinners SA65 is best used for thinning out epoxy based products in the Scotchkote range and can be used to clean up afterwards too.
Scotchkote Thinners SA65 can be applied easily by mixing the substance at a percentage rate of usually between 5% and 10% to produce a thinner film thickness during application.
Surface and Environment
Scotchkote Thinners SA65 is highly suited for use in industrial based environments where a thinner surface, film thickness is required and can be used internally or externally with the appropriate product.
- Scotchkote Thinners SA65.
- Formerly Copon SA65 Thinners and Thistlebond TAC 882 SFE Thinners.
- Solvent based cleaner and thinner.
- For use with epoxy based products.
- Available in 5, 25 and 200 litres.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.