Please note, this product is now discontinued.
Selemix Direct Hardener 9-010 for use with the Selemix epoxy range of 2 pack paints.
PPG Selemix sell their hardeners separately to the paint so small amounts of paint can be mixed rather than using the whole tin at once saving money.
The typical ratio of paint to hardener is 4 parts paint to 1 part hardener, always consult the manufactures technical data sheet for applicable ration prior to use Selemix hardener 9-010 is compatible with Selemix 2 pack Primers 1.774.1300, 7-413, 1.774.1400, 7-414 and Selemix 2 pack Topcoats 1.774.1000, 7-410, 1.744.1200, 7-412.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.